We currently support most pressure and temperature applications. If powered via 12V, all gauges will read voltage plus your hardwired sensor:
We are open to alternative sensors, if you have something in mind we can discuss a solution.
The gauge is recommended to be powered via 12V. This can be through a fuse tap or any power source in the car between 7-24V.
You can also power the gauge with USB-C, although not recommended. With USB-C you cannot monitor your battery voltage and the sensors become slighly less accurate.
Currently all sensors need to be hardwired to the gauge. This involves finding a location to install a sensor and running wires through the firewall to the gauge.
The gauge can either be mounted internally with a bracket, or with externally with a ball joint using 3M adhesive. We can discuss your installation pending approval
The gauge can be updated at vensora.io/updates using the included USB-C cable. An email will be sent out whenever an update is available.
Upon receiving your prototype gauge, we will provide a link to a feedback form where you can provide feedback on the gauge.